Warmly celebrate the 18th anniversary of Sichuan Covestro Precision Mould Co., Ltd

The years are like songs, the wind and frost are picturesque, and eighteen years later, Covestro ushered in its 18th birthday.

16

2022

/

06

Covestro Precision VS Wuhou Small and Medium Basketball Friendship Tournament ended successfully

In order to promote communication between enterprises, enrich the cultural life of employees, and enhance the cohesion between employees. On May 22, Sichuan Covestro Precision Co., Ltd. and Chengdu Wuhou SME Financing Guarantee Co., Ltd. held a basketball friendship event at Chongzhou Weifu Basketball Club, and Mr. Deng Xingqiang, the general manager, personally went to the scene to cheer for the players of both sides.

29

2021

/

07

Jiangsu University "Sichuan Covestro Scholarship" award ceremony presentation

On November 27, 2020, the award ceremony of the 2020 "Sichuan Covest Scholarship" of Jiangsu University was held in the School of Mechanical Engineering. Zhang Liming, Deputy Secretary of the Party Committee of the School of Mechanical Engineering of Jiangsu University, Deng Xianqiang, Chairman of Sichuan Coves, and Hong Yajie, Deputy Secretary of the Youth League Committee of the School of Mechanical Engineering of Jiangsu University attended the award ceremony. Guo Fengjiao, 2017 counselor of the School of Mechanical Engineering of Jiangsu University, Shan Shan, counselor of 2019, Yin Feng, assistant to the general manager of Sichuan Korth, winners of the 2020 "Sichuan Coth Scholarship" and representatives of the 2018 and 2019 students of the School of Mechanical Engineering attended the award ceremony.

02

2020

/

12

Unite to ensure production and work overtime - the polishing team successfully completed the delivery of products

At the end of October, the customer's urgent orders increased sharply, not only has high requirements for product appearance and quality, but also the delivery time given by the customer is more than a week earlier than before, which brings a lot of challenges to the polishing work of the BENCH department of the mold production center, the normal capacity working hours of the polishing group is 40 hours / day, and the production capacity working hours given by the recent planning department have exceeded 60 hours / day.

25

2020

/

11

A briefing on "Cross-departmental Cooperation and Conflict Management", part of the Covestro Precision Management Training Series

In May, the scenery was full of greenery, and the summer was getting stronger, and this management training came as scheduled. On the 23rd, more than 30 leading cadres and business executives of various ministries and subsidiaries participated in the training with the theme of "Inter-ministerial Cooperation and Conflict Management", and Ms. Tang Minling, Director of the Human Resources Administration Center, served as the main lecturer of the training. At the request of various ministries, the Human Resources Administration Center changed its usual and set up the training class in Zhangjia Garden, which is beautiful on Guanghua Avenue.

03

2020

/

06

Covestro "Lean Transformation 2020" Phase 1 work brief

According to the company's annual strategic plan, at the beginning of the new year of 2020, the company launched the "Lean Transformation 2020" project.

22

2020

/

05

The Management Committee && Remuneration Management Committee &&&Audit Working Group was established Kick-off meeting

On May 14, 2020, the "Kick-off Meeting for the Establishment of the Management Committee & Remuneration Management Committee & Audit Working Group" was held in the A 3 training room. The meeting was chaired by Ms. Tang Minling, Director of the Human Resources Administration Center, and was attended by the management personnel of the group and above.

22

2020

/

05

Coth was sixteen years old

Sixteen years, very short, in the river of history, just a small wave. In this season of beauty and peace, Covestro ushered in its sixteenth birthday.

22

2020

/

05

Sichuan Covestro Precision Mould Co., Ltd. was selected as a member of the "Economic System Reform Think Tank of Chengdu Development and Reform Commission"

On April 16, 2020, after a strict selection process, the list of members of the Chengdu Municipal Development and Reform Commission's Economic System Reform Think Tank was released, and Mr. Deng Xingqiang, Executive Director and General Manager of Sichuan Covestro Precision Mould Co., Ltd., was selected as a member of the think tank as a representative of entrepreneurs in the field of new economy.

11

2020

/

05

Unite as one, unite as one, overcome the epidemic and resume production and work - the resumption of work during the epidemic

Gengzi New Year, the epidemic is raging, an unexpected new crown pneumonia epidemic has grounded all Chinese at home, young Covestro employees failed to go to work on time on the seventh day of the first lunar month, failed to wait for the notice of going to work on the tenth day of the first month, and still failed to wait for the fifteenth day of the first month... The resumption of work dates has been delayed again and again.

08

2020

/

05

The company successfully completed the annual selection and recruitment of perennial legal counsel

The company's perennial legal counsel service expires at the end of April, and according to the needs, our company timely launched a new round of perennial legal counsel selection.

29

2020

/

04

The company organizes training for key ERP users

On the afternoon of April 14, the company organized the first business training meeting for key ERP users, and conducted business training on computer applications and ERP operations.

28

2020

/

04